1. Products
  2. R&D and Science
  3. High Performance Cameras
  4. Fixed Advanced-level Cameras
  5. FLIR X8580™
Cart

Added to cart

product image

Model:

-
+
Go to cart
Continue shopping

Your order qualifies for free 2-day shipping and easy returns

Recommended for you

High Definition MWIR Science-Grade Camera

FLIR X8580™

Model: FLIR X8580 InSb (1.5–5.0 µm), f/2.5 Go to Product Support
product image

The FLIR X8580 midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.

Standout Performance, Game-changing Capabilities

  • On-Camera RAM and SSD Recording

    Record up to 34 seconds of full HD resolution data directly to on-camera memory, or up to 15 minutes to included 512 GB SSD

  • Synchronization and Triggering

    Capture essential data easily and control image frame generation precisely with dedicated trigger input and new Tri-level Sync input

  • Multiple Software Interfaces

    Stream thermal data directly from the SSD over any of the digital data buses for advanced analysis with FLIR Research Studio software

Specifications
Resolution
1280 × 1024
Detector Pitch
12 µm
Spectral Range
1.5–5.0 µm
Detector Type
FLIR indium antimonide (InSb)
Camera f-number
f/2.5
Dynamic Range
14-bit
NETD
30 mK typical
Frame Rate [Full Window]
Programmable: ~0.5 Hz to 181 Hz
Standard Temperature Range [with band matched optics]
-20°C to 350°C (-4°F to 662°F)
Optional Temperature Range [with band matched optics]
ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (957°F–5432°F)
Filtering
4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
Focus
Motorized (compatible w/manual)
Imaging & Optical
Available Lenses
Manual (broadband): 25 mm, 50 mm, 100 mm Motorized (broadband): None
Camera f-number
f/2.5
Close-up Lenses/Microscopes
No broadband microscopes available
Detector Pitch
12 µm
Detector Type
FLIR indium antimonide (InSb)
Digital Zoom
1x, Auto (best fit)
Direct to SSD Recording
Yes, removable 512 GB SSD included
Dynamic Range
14-bit
Filtering
4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
Focus
Motorized (compatible w/manual)
Frame Rate [Full Window]
Programmable: ~0.5 Hz to 181 Hz
Image Time Stamp
Internal IRIG-B decoder clock TSPI accurate time stamp
Lens Interface
FLIR FPO-M (4-tab bayonet, motorized)
NETD
30 mK typical
On Camera Image Storage
RAM (volatile): 16 GB, up to 6,500 frames full frame SSD (user-removable/non-volatile): ~15 minutes of recording with included 512 GB SSD (more than 2 hours possible with 4 TB SSD purchased separately)
Operability
≥99.95% typical
Overlay
Customizable (ability to toggle off)
Palette
Selectable 8-bit
Pixel Clock
355 MHz
Radiometric Data Streaming
Simultaneous Gigabit Ethernet (GigE Vision), Camera Link,CoaXPress® 1.1, dual 5 Gb links
Readout Modes
Asynchronous integrate while read, Asynchronous integrate then read
Readout Type
Snapshot
Resolution
1280 × 1024
Sensor Cooling
Linear sterling cooler
Spectral Range
1.5–5.0 µm
Standard Video
HDMI, SDI
Subwindow Modes
Flexible windowing down to 64 × 4 (steps of 64 columns, 4 rows)
Video Modes
HD-SDI: 720p@50/59.9Hz, 1080p@25/29.97Hz; SD-SDI: 480i@60Hz, 576i@50Hz
Measurement & Analysis
Accuracy
≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical)
Ambient Drift Compensation [with factory cal]
Yes
Automatic Gain Control
Manual, Linear, Plateau equalization, ROI, DDE
Optional Temperature Range [with band matched optics]
ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (957°F–5432°F)
Standard Temperature Range [with band matched optics]
-20°C to 350°C (-4°F to 662°F)
Communication & Data Storage
Synchronization Modes
Sync In, Sync Out, Tri-Level Sync
Power
Power
24 VDC (<50 W steady state)
Environmental & Certifications
Mounting
2 × 1/4 in -20 / 1 × 3/8 in -16 / 4 × #10 -24 / Side: 3x 1/4 in -20 (each side)
Operating Temperature Range
-20°C to 50°C (-4°F to 122°F)
Related Content
Accessories
Cases and Pouches
Batteries and Power
Cables Adapters
Related Products
Media gallery
Connecting to your FLIR X-Series High-Speed, High Definition Camera
Connecting to your FLIR X-Series High-Speed, High Definition Camera
Installing warm filters on FLIR cooled science cameras
Installing warm filters - SCI cameras
Unboxing your FLIR X-Series High-Speed, High Definition Camera
Unboxing your FLIR X-Series High-Speed, High Definition Camera
Related Documents

FLIR X8580™ - Model: FLIR X8580 InSb (1.5–5.0 µm), f/2.5

Change Selection